[pe_ospf] Check OSPF sessions with DUT (wait up to 30 seconds) [ node(s): p1 ]
[PASS]    p1: OSPFv2 neighbor 10.0.0.3 is in state Full/-
[PASS]    Test succeeded in 0.1 seconds

[ldp]     Check LDP session [ node(s): p1 ]
[WAITING] Waiting for LDP to start (retrying for 30 seconds)
[PASS]    Validation succeeded on p1
[PASS]    Test succeeded in 7.3 seconds

[pe_ibgp] Check IBGP session between PE-routers [ node(s): pe2 ]
[PASS]    pe2: Neighbor 10.0.0.3 (dut) is in state Established
[PASS]    Test succeeded in 0.1 seconds

[ce_ospf] Check PE-CE OSPF session [ node(s): ce1 ]
[PASS]    ce1: OSPFv2 neighbor 10.0.0.3 is in state Full/-
[PASS]    Test succeeded in 0.1 seconds

[pfx_ce1] Check CE2 OSPF prefix on CE1 [ node(s): ce1 ]
[FAIL]    Node ce1: The prefix 10.0.0.2/32 is not in the OSPF topology
Returned result
================================================================================
10.0.0.1/32:
  routeType: N
  transit: false
  cost: 0
  area: 0.0.0.0
  nexthops:
  - ip: ' '
    directlyAttachedTo: lo
10.1.0.12/30:
  routeType: N
  transit: false
  cost: 10
  area: 0.0.0.0
  nexthops:
  - ip: ' '
    directlyAttachedTo: eth1
10.0.0.3:
  routeType: 'R '
  cost: 10
  area: 0.0.0.0
  routerType: asbr
  nexthops:
  - ip: 10.1.0.14
    via: eth1


[pfx_ce2] Check CE1 OSPF prefix on CE2 [ node(s): ce2 ]
[PASS]    ce2: The prefix 10.0.0.1/32 is in the OSPF topology
[PASS]    Test succeeded in 0.1 seconds

[ping]    Ping-based end-to-end reachability test [ node(s): ce1 ]
[WAITING] Waiting for end-to-end MPLS path (retrying for 5 seconds)
[PASS]    ce1: Ping to ce2 (10.0.0.2) from 10.0.0.1/32 succeeded
[PASS]    Test succeeded in 1.2 seconds

[FAIL]    7 tests completed, one test failed