[WARNING]: Invalid characters were found in group names but not replaced, use -vvvv to see details [WARNING]: Could not match supplied host pattern, ignoring: unprovisioned PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Wait for device to become ready] ***************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/vjunos-switch-clab.yml for s1, s2 TASK [Wait for SSH server] ***************************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/vm-clab-ssh-check.yml for s1, s2 TASK [Execute local ssh command to check vjunos-switch readiness] ************** FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check vjunos-switch readiness (40 retries left). FAILED - RETRYING: [s2 -> localhost]: Execute local ssh command to check vjunos-switch readiness (40 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check vjunos-switch readiness (39 retries left). FAILED - RETRYING: [s2 -> localhost]: Execute local ssh command to check vjunos-switch readiness (39 retries left). changed: [s1 -> localhost] changed: [s2 -> localhost] TASK [Confirm s1 SSH server works] ********************************************* ok: [s1] => msg: Node s1 is ready. ok: [s2] => msg: Node s2 is ready. TASK [Wait for ge-0/0/0 interface] ********************************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/vjunos-switch.yml for s1, s2 TASK [Wait for ge-0/0/0 to appear] ********************************************* ok: [s1] ok: [s2] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s2] ok: [s1] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.0.1/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.1/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.0.2/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.2/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [h4] => msg: |- initial configuration for h4 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.3.4/24 dev eth1 2>/dev/null set -e ip addr add 172.16.3.4/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # lan prefix: 172.16.0.0/16 local subnet: 172.16.3.0/24 set +e ip route del 172.16.0.0/16 2>/dev/null set -e ip route add 172.16.0.0/16 via 172.16.3.6 # loopback prefix: 10.0.0.0/24 local subnet: 172.16.3.0/24 set +e ip route del 10.0.0.0/24 2>/dev/null set -e ip route add 10.0.0.0/24 via 172.16.3.6 # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.3.0/24 # p2p prefix: 10.1.0.0/16 local subnet: 172.16.3.0/24 set +e ip route del 10.1.0.0/16 2>/dev/null set -e ip route add 10.1.0.0/16 via 172.16.3.6 # router_id prefix: 10.0.0.0/24 local subnet: 172.16.3.0/24 # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.3.0/24 set +e ip route del 10.2.0.0/24 2>/dev/null set -e ip route add 10.2.0.0/24 via 172.16.3.6 # # Print the final routing table ip route ok: [h3] => msg: |- initial configuration for h3 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.2.3/24 dev eth1 2>/dev/null set -e ip addr add 172.16.2.3/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # lan prefix: 172.16.0.0/16 local subnet: 172.16.2.0/24 set +e ip route del 172.16.0.0/16 2>/dev/null set -e ip route add 172.16.0.0/16 via 172.16.2.5 # loopback prefix: 10.0.0.0/24 local subnet: 172.16.2.0/24 set +e ip route del 10.0.0.0/24 2>/dev/null set -e ip route add 10.0.0.0/24 via 172.16.2.5 # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.2.0/24 # p2p prefix: 10.1.0.0/16 local subnet: 172.16.2.0/24 set +e ip route del 10.1.0.0/16 2>/dev/null set -e ip route add 10.1.0.0/16 via 172.16.2.5 # router_id prefix: 10.0.0.0/24 local subnet: 172.16.2.0/24 # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.2.0/24 set +e ip route del 10.2.0.0/24 2>/dev/null set -e ip route add 10.2.0.0/24 via 172.16.2.5 # # Print the final routing table ip route ok: [s1] => msg: |- initial configuration for s1 ========================================= system { host-name s1 static-host-mapping { h1 inet 172.16.0.1; h2 inet 172.16.0.2; h3 inet 172.16.2.3; h4 inet 172.16.3.4; s2 inet 10.0.0.6; } } interfaces { ge-0/0/1 { flexible-vlan-tagging; native-vlan-id 1000; } ge-0/0/1.0 { vlan-id 1000; } ge-0/0/2 { flexible-vlan-tagging; native-vlan-id 1; } ge-0/0/2.0 { vlan-id 1; } ge-0/0/0 { flexible-vlan-tagging; } ge-0/0/0.1001 { vlan-id 1001; } } interfaces { ge-0/0/0 { mtu 1514; } ge-0/0/1 { mtu 1514; } ge-0/0/2 { mtu 1514; } lo0.0 { family inet { address 10.0.0.5/32; } } ge-0/0/0.0 { description "s1 -> s2"; } ge-0/0/1.0 { } ge-0/0/2.0 { description "s1 -> h3 [stub]"; family inet { address 172.16.2.5/24; } } ge-0/0/0.1001 { description "s1 -> s2"; family inet { address 172.16.4.5/24; } } irb.1000 { description "VLAN red (1000) -> [h1,s2,h2]"; } } protocols { lldp { interface fxp0 { disable; } interface all; } } ok: [s2] => msg: |- initial configuration for s2 ========================================= system { host-name s2 static-host-mapping { h1 inet 172.16.0.1; h2 inet 172.16.0.2; h3 inet 172.16.2.3; h4 inet 172.16.3.4; s1 inet 10.0.0.5; } } interfaces { ge-0/0/1 { flexible-vlan-tagging; native-vlan-id 1000; } ge-0/0/1.0 { vlan-id 1000; } ge-0/0/2 { flexible-vlan-tagging; native-vlan-id 1; } ge-0/0/2.0 { vlan-id 1; } ge-0/0/0 { flexible-vlan-tagging; } ge-0/0/0.1001 { vlan-id 1001; } } interfaces { ge-0/0/0 { mtu 1514; } ge-0/0/1 { mtu 1514; } ge-0/0/2 { mtu 1514; } lo0.0 { family inet { address 10.0.0.6/32; } } ge-0/0/0.0 { description "s2 -> s1"; } ge-0/0/1.0 { } ge-0/0/2.0 { description "s2 -> h4 [stub]"; family inet { address 172.16.3.6/24; } } ge-0/0/0.1001 { description "s2 -> s1"; family inet { address 172.16.4.6/24; } } irb.1000 { description "VLAN red (1000) -> [h1,s1,h2]"; } } protocols { lldp { interface fxp0 { disable; } interface all; } } TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/linux/initial-clab.yml for h1, h2, h3, h4 included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/junos.yml for s1, s2 TASK [set_fact] **************************************************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Create initial container setup from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h1 -> localhost] changed: [h4 -> localhost] changed: [h3 -> localhost] changed: [h2 -> localhost] TASK [Initial container configuration via /tmp/config-ehgXRZmh-h1.sh] ********** changed: [h2 -> localhost] changed: [h1 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [file] ******************************************************************** changed: [h3 -> localhost] changed: [h2 -> localhost] changed: [h1 -> localhost] changed: [h4 -> localhost] TASK [junos_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/junos.j2] *** fatal: [s1]: FAILED! => changed=false module_stderr: 'b''error: VLAN-ID must be specified on tagged ethernet interfaces\nerror: configuration check-out failed''' module_stdout: '' msg: |- MODULE FAILURE See stdout/stderr for the exact error fatal: [s2]: FAILED! => changed=false module_stderr: 'b''error: VLAN-ID must be specified on tagged ethernet interfaces\nerror: configuration check-out failed''' module_stdout: '' msg: |- MODULE FAILURE See stdout/stderr for the exact error PLAY [Deploy module-specific configurations] *********************************** PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* h1 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h2 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h3 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h4 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 s1 : ok=14 changed=1 unreachable=0 failed=1 skipped=0 rescued=0 ignored=0 s2 : ok=14 changed=1 unreachable=0 failed=1 skipped=0 rescued=0 ignored=0 Fatal error in netlab: Executing Ansible playbook /home/pipi/net101/tools/netsim/ansible/initial-config.ansible failed Error executing ansible-playbook /home/pipi/net101/tools/netsim/ansible/initial-config.ansible: Command '['ansible-playbook', '/home/pipi/net101/tools/netsim/ansible/initial-config.ansible']' returned non-zero exit status 2.