Warning in ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
... Ansible core version 2.19 introduced breaking changes in templates and playbooks
... We tested netlab core with Ansible version 12.x but not every device template
... You might want to downgrade Ansible to version 11.10 or lower.
... Use 'netlab install ansible' on Ubuntu to do that
... Finally, please open a GitHub issue if you experience errors/crashes
... Set defaults.ansible.warnings.ver12 to False to hide this warning
 [INFO] Checking for updates in configuration templates
 [INFO] Creating configuration snippets
[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned
[WARNING]: Found variable using reserved name 'hosts'.
Origin: /work/netlab_cicd/hogs/group_vars/all/topology.yml:158:1

156     ipv4: 10.2.0.0/24
157     prefix: 32
158 hosts:
    ^ column 1


PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [rr2]
ok: [r1]
ok: [r2]
ok: [x1]
ok: [dut]

TASK [Generic readiness tests] *************************************************
skipping: [rr2]
skipping: [r1]
skipping: [r2]
skipping: [x1]
included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/ssh.yml for dut => (item=ssh)

TASK [Check if 'sshpass' is installed] *****************************************
ok: [dut -> localhost]

TASK [Check for 'timeout' command] *********************************************
ok: [dut -> localhost]

TASK [Execute local ssh command to check ssh readiness] ************************
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (40 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (39 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (38 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (37 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (36 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (35 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (34 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (33 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (32 retries left).
ok: [dut -> localhost]

TASK [Confirm dut SSH server works] ********************************************
ok: [dut] => {
    "msg": "Node dut is ready."
}

TASK [Find device readiness script] ********************************************
ok: [rr2]
ok: [r1]
ok: [r2]
ok: [x1]
ok: [dut]

TASK [Wait for device to become ready] *****************************************
skipping: [rr2]
skipping: [r1]
skipping: [r2]
skipping: [x1]
included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/junos.yml for dut

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [Wait for first interface (ge-0/0/0)] *************************************
ok: [dut]

TASK [Normalize config on bridge-like devices] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for x1

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [dut]

TASK [Find configuration template for normalize] *******************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [dut]

TASK [Deploy normalize configuration] ******************************************
skipping: [dut]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [rr2]

TASK [Find configuration template for normalize] *******************************
ok: [rr2]

TASK [fail] ********************************************************************
skipping: [rr2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [rr2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [rr2]

TASK [Deploy normalize configuration] ******************************************
skipping: [rr2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r1]

TASK [Find configuration template for normalize] *******************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r1]

TASK [Deploy normalize configuration] ******************************************
skipping: [r1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r2]

TASK [Find configuration template for normalize] *******************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r2]

TASK [Deploy normalize configuration] ******************************************
skipping: [r2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [x1]

TASK [Find configuration template for normalize] *******************************
ok: [x1]

TASK [fail] ********************************************************************
skipping: [x1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [x1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [x1]

TASK [Deploy normalize configuration] ******************************************
skipping: [x1]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for x1

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [dut]

TASK [Find configuration template for initial] *********************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "initial configuration for dut\n=========================================\nsystem {\n  host-name dut;\n  static-host-mapping {\n  }\n}\n\n\ninterfaces {\n  ge-0/0/0 {\n    mtu 1514;\n  }\n  ge-0/0/1 {\n    mtu 1514;\n  }\n\n  lo0.0 {\n    \n      family inet6 {\n        address 2001:db8:1::1/128;\n      }\n    \n  }\n  ge-0/0/0.0 {\n    description \"dut -> r1\";\n    \n      family inet6 {\n        address 2001:db8:3::1/64;\n      }\n    \n  }\n  ge-0/0/1.0 {\n    description \"dut -> x1 [external]\";\n    \n      family inet6 {\n        address 2001:db8:3:3::1/64;\n      }\n    \n  }\n}\nprotocols {\n  lldp {\n    interface fxp0 {\n      disable;\n    }\n    interface all;\n  }\n  router-advertisement {\n    interface ge-0/0/0.0;\n    interface ge-0/0/1.0;\n  }\n}\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for dut

TASK [junos_config: deploying initial from /work/netlab_cicd/hogs/node_files/dut/initial] ***
[WARNING]: mgd: statement must contain additional statements
changed: [dut]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [rr2]

TASK [Find configuration template for initial] *********************************
ok: [rr2]

TASK [fail] ********************************************************************
skipping: [rr2]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [rr2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [rr2] => {
    "msg": "initial configuration for rr2\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=0\nsysctl -w net.ipv6.conf.all.forwarding=1\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=0\nsysctl -qw net.ipv6.conf.eth1.accept_ra=0\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname rr2\n!\nlog file /tmp/logging\n\n!\nipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ! no ip address\n ipv6 address 2001:db8:1::2/128\n!\ninterface eth1\n no shutdown\n description rr2 -> r1\n ! no ip address\n ipv6 address 2001:db8:3:1::2/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for rr2

TASK [Attempt to load VRF kernel module] ***************************************
changed: [rr2 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [rr2]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for rr2

TASK [template] ****************************************************************
changed: [rr2]

TASK [set_fact] ****************************************************************
ok: [rr2]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/hogs/node_files/rr2/initial] ***
changed: [rr2]

TASK [run vtysh to import initial config from /work/netlab_cicd/hogs/node_files/rr2/initial] ***
skipping: [rr2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r1]

TASK [Find configuration template for initial] *********************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r1] => {
    "msg": "initial configuration for r1\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=0\nsysctl -w net.ipv6.conf.all.forwarding=1\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\nif [ ! -e /sys/class/net/eth4 ]; then\n  if [ ! -e /sys/devices/virtual/net/eth4 ]; then\n    ip link add eth4 type dummy\n    ip link set dev eth4 up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=0\nsysctl -qw net.ipv6.conf.eth1.accept_ra=0\nip link set dev eth1 mtu 1500\nip link set eth1 up\nip link set eth2 down\nsysctl -qw net.ipv6.conf.eth2.autoconf=0\nsysctl -qw net.ipv6.conf.eth2.accept_ra=0\nip link set dev eth2 mtu 1500\nip link set eth2 up\nip link set eth3 down\nsysctl -qw net.ipv6.conf.eth3.autoconf=0\nsysctl -qw net.ipv6.conf.eth3.accept_ra=0\nip link set dev eth3 mtu 1500\nip link set eth3 up\nip link set eth4 down\nsysctl -qw net.ipv6.conf.eth4.autoconf=0\nsysctl -qw net.ipv6.conf.eth4.accept_ra=0\nip link set dev eth4 mtu 1500\nip link set eth4 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname r1\n!\nlog file /tmp/logging\n\n!\nipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ! no ip address\n ipv6 address 2001:db8:1::a/128\n!\ninterface eth1\n no shutdown\n description r1 -> dut\n ! no ip address\n ipv6 address 2001:db8:3::2/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ninterface eth2\n no shutdown\n description r1 -> rr2\n ! no ip address\n ipv6 address 2001:db8:3:1::1/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ninterface eth3\n no shutdown\n description r1 -> r2\n ! no ip address\n ipv6 address 2001:db8:3:2::1/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ninterface eth4\n no shutdown\n description r1 -> stub [stub]\n ! no ip address\n ipv6 address 2001:db8:cafe:1::a/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for r1

TASK [Attempt to load VRF kernel module] ***************************************
changed: [r1 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [r1]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for r1

TASK [template] ****************************************************************
changed: [r1]

TASK [set_fact] ****************************************************************
ok: [r1]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/hogs/node_files/r1/initial] ***
changed: [r1]

TASK [run vtysh to import initial config from /work/netlab_cicd/hogs/node_files/r1/initial] ***
skipping: [r1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r2]

TASK [Find configuration template for initial] *********************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r2] => {
    "msg": "initial configuration for r2\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=0\nsysctl -w net.ipv6.conf.all.forwarding=1\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=0\nsysctl -qw net.ipv6.conf.eth1.accept_ra=0\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname r2\n!\nlog file /tmp/logging\n\n!\nipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ! no ip address\n ipv6 address 2001:db8:1::3/128\n!\ninterface eth1\n no shutdown\n description r2 -> r1\n ! no ip address\n ipv6 address 2001:db8:3:2::2/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for r2

TASK [Attempt to load VRF kernel module] ***************************************
changed: [r2 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [r2]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for r2

TASK [template] ****************************************************************
changed: [r2]

TASK [set_fact] ****************************************************************
ok: [r2]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/hogs/node_files/r2/initial] ***
changed: [r2]

TASK [run vtysh to import initial config from /work/netlab_cicd/hogs/node_files/r2/initial] ***
skipping: [r2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [x1]

TASK [Find configuration template for initial] *********************************
ok: [x1]

TASK [fail] ********************************************************************
skipping: [x1]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [x1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [x1] => {
    "msg": "initial configuration for x1\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=0\nsysctl -w net.ipv6.conf.all.forwarding=1\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=0\nsysctl -qw net.ipv6.conf.eth1.accept_ra=0\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname x1\n!\nlog file /tmp/logging\n\n!\nipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ! no ip address\n ipv6 address 2001:db8:cafe:e::1/64\n!\ninterface eth1\n no shutdown\n description x1 -> dut [external]\n ! no ip address\n ipv6 address 2001:db8:3:3::2/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for x1

TASK [Attempt to load VRF kernel module] ***************************************
changed: [x1 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [x1]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for x1

TASK [template] ****************************************************************
changed: [x1]

TASK [set_fact] ****************************************************************
ok: [x1]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/hogs/node_files/x1/initial] ***
changed: [x1]

TASK [run vtysh to import initial config from /work/netlab_cicd/hogs/node_files/x1/initial] ***
skipping: [x1]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [rr2]
ok: [r1]
ok: [r2]
ok: [x1]
ok: [dut]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr2 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for rr2 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for x1 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for x1 => (item=bgp)

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [dut]

TASK [Find configuration template for ospf] ************************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "ospf configuration for dut\n=========================================\nrouting-options {\n  router-id 10.0.0.1\n}\nprotocols {\n  delete: ospf3;\n}\n\nprotocols {\n  ospf3 {\n    area 0.0.0.0 {\n      interface lo0.0 {\n      }\n    }\n    area 0.0.0.0 {\n      interface ge-0/0/0.0 {\n        interface-type p2p;\n      }\n    }\n  }\n}\n\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for dut

TASK [junos_config: deploying ospf from /work/netlab_cicd/hogs/node_files/dut/ospf] ***
[WARNING]: statement not found
changed: [dut]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [dut]

TASK [Find configuration template for bgp] *************************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "bgp configuration for dut\n=========================================\n\nrouting-options {\n  autonomous-system 65000;\n  router-id 10.0.0.1\n}\n\n\npolicy-options community x-route-permit-mark members large:65535:0:65536;\n\npolicy-options {\n  delete: policy-statement bgp-advertise;\n  delete: policy-statement bgp-redistribute;\n  delete: policy-statement next-hop-ebgp-ipv4;\n  delete: policy-statement next-hop-all-ipv4;\n  delete: policy-statement next-hop-ebgp-ipv6;\n  delete: policy-statement next-hop-all-ipv6;\n  delete: route-filter-list bgp-announce;\n}\n\npolicy-options {\n\n  route-filter-list bgp-announce {\n  }\n\n  policy-statement next-hop-ebgp-ipv4 {\n    term next-hop-self-ipv4 {\n      from {\n        family inet;\n        route-type external;\n      }\n      then {\n        next-hop self;\n      }\n    }\n  }\n\n  policy-statement next-hop-all-ipv4 {\n    term next-hop-self-ipv4 {\n      from {\n        family inet;\n      }\n      then {\n        next-hop self;\n      }\n    }\n  }\n\n  policy-statement next-hop-ebgp-ipv6 {\n    term next-hop-self-ipv6 {\n      from {\n        family inet6;\n        route-type external;\n      }\n      then {\n        next-hop self;\n      }\n    }\n  }\n\n  policy-statement next-hop-all-ipv6 {\n    term next-hop-self-ipv6 {\n      from {\n        family inet6;\n      }\n      then {\n        next-hop self;\n      }\n    }\n  }\n\n\n  policy-statement bgp-advertise {\n    term advertise {\n      from {\n        protocol direct;\n        interface [ \n lo0.0  ];\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n\n    term originate {\n      from {\n        protocol static;\n        route-filter-list bgp-announce;\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n\n  }\n\n  policy-statement bgp-redistribute {\n    term redis_bgp {\n      from protocol bgp;\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n  }\n\n  policy-statement bgp-final {\n    term final-option {\n      from community x-route-permit-mark;\n      then {\n        community delete x-route-permit-mark;\n        accept;\n      }\n    }\n    term default-reject {\n      then reject;\n    }\n  }\n\n  policy-statement bgp-initial {\n    term initial-cleanup {\n      from community x-route-permit-mark;\n      then {\n        community delete x-route-permit-mark;\n        next policy;\n      }\n    }\n  }\n\n}\nprotocols {\n  delete: bgp;\n}\nprotocols {\n  bgp {\n    group ibgp-peers-ipv6 {\n      type internal;\n      export [ \n          next-hop-ebgp-ipv6 bgp-advertise bgp-redistribute bgp-final\n        ];\n      advertise-inactive;\n      cluster 10.0.0.42;\n      neighbor 2001:db8:1::2 {\n\n        local-address 2001:db8:1::1;\n        description rr2;\n        family inet6 {\n          unicast;\n        }\n      }\n      neighbor 2001:db8:1::a {\n\n        local-address 2001:db8:1::1;\n        description r1;\n        family inet6 {\n          unicast;\n        }\n      }\n      neighbor 2001:db8:1::3 {\n\n        local-address 2001:db8:1::1;\n        description r2;\n        family inet6 {\n          unicast;\n        }\n      }\n    }\n    group ebgp-peers {\n      export [ \n          bgp-advertise bgp-redistribute bgp-final\n        ];\n      advertise-inactive;\n      neighbor 2001:db8:3:3::2 {\n\n        peer-as 65101;\n        description x1;\n        family inet6 {\n          unicast;\n        }\n      }\n    }\n  }\n}\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for dut

TASK [junos_config: deploying bgp from /work/netlab_cicd/hogs/node_files/dut/bgp] ***
changed: [dut]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [rr2]

TASK [Find configuration template for ospf] ************************************
ok: [rr2]

TASK [fail] ********************************************************************
skipping: [rr2]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [rr2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [rr2] => {
    "msg": "ospf configuration for rr2\n=========================================\n!\n! OSPFv3 FRR configuration\n!\ninterface lo\n! \n ipv6 ospf6 area 0.0.0.0\n!\ninterface eth1\n! rr2 -> r1\n ipv6 ospf6 area 0.0.0.0\n ipv6 ospf6 network point-to-point\n!\n!\nrouter ospf6\n ospf6 router-id 10.0.0.2\n timers lsa min-arrival 100\n timers throttle spf 10 50 500\n\n\nexit\n\n!\ndo write\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for rr2

TASK [template] ****************************************************************
changed: [rr2]

TASK [set_fact] ****************************************************************
ok: [rr2]

TASK [run /tmp/config.sh to deploy ospf config from /work/netlab_cicd/hogs/node_files/rr2/ospf] ***
skipping: [rr2]

TASK [run vtysh to import ospf config from /work/netlab_cicd/hogs/node_files/rr2/ospf] ***
changed: [rr2]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [rr2]

TASK [Find configuration template for bgp] *************************************
ok: [rr2]

TASK [fail] ********************************************************************
skipping: [rr2]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [rr2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [rr2] => {
    "msg": "bgp configuration for rr2\n=========================================\n!\nrouter bgp 65000\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.2\n  bgp cluster-id 10.0.0.43\n!\n  neighbor 2001:db8:1::1 remote-as 65000\n  neighbor 2001:db8:1::1 description dut\n  neighbor 2001:db8:1::1 update-source lo\n!\n  neighbor 2001:db8:1::a remote-as 65000\n  neighbor 2001:db8:1::a description r1\n  neighbor 2001:db8:1::a update-source lo\n!\n  neighbor 2001:db8:1::3 remote-as 65000\n  neighbor 2001:db8:1::3 description r2\n  neighbor 2001:db8:1::3 update-source lo\n!\n address-family ipv6 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 2001:db8:1::2/128\n!\n  neighbor 2001:db8:1::1 activate\n  neighbor 2001:db8:1::1 next-hop-self\n  no neighbor 2001:db8:1::1 send-community all\n  neighbor 2001:db8:1::1 send-community standard\n  neighbor 2001:db8:1::1 send-community large\n  neighbor 2001:db8:1::1 send-community extended\n!\n  neighbor 2001:db8:1::a activate\n  neighbor 2001:db8:1::a next-hop-self\n  neighbor 2001:db8:1::a route-reflector-client\n  no neighbor 2001:db8:1::a send-community all\n  neighbor 2001:db8:1::a send-community standard\n  neighbor 2001:db8:1::a send-community large\n  neighbor 2001:db8:1::a send-community extended\n!\n  neighbor 2001:db8:1::3 activate\n  neighbor 2001:db8:1::3 next-hop-self\n  neighbor 2001:db8:1::3 route-reflector-client\n  no neighbor 2001:db8:1::3 send-community all\n  neighbor 2001:db8:1::3 send-community standard\n  neighbor 2001:db8:1::3 send-community large\n  neighbor 2001:db8:1::3 send-community extended\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for rr2

TASK [template] ****************************************************************
changed: [rr2]

TASK [set_fact] ****************************************************************
ok: [rr2]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/hogs/node_files/rr2/bgp] ***
skipping: [rr2]

TASK [run vtysh to import bgp config from /work/netlab_cicd/hogs/node_files/rr2/bgp] ***
changed: [rr2]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [r1]

TASK [Find configuration template for ospf] ************************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r1] => {
    "msg": "ospf configuration for r1\n=========================================\n!\n! OSPFv3 FRR configuration\n!\ninterface lo\n! \n ipv6 ospf6 area 0.0.0.0\n!\ninterface eth1\n! r1 -> dut\n ipv6 ospf6 area 0.0.0.0\n ipv6 ospf6 network point-to-point\n!\ninterface eth2\n! r1 -> rr2\n ipv6 ospf6 area 0.0.0.0\n ipv6 ospf6 network point-to-point\n!\ninterface eth3\n! r1 -> r2\n ipv6 ospf6 area 0.0.0.0\n ipv6 ospf6 network point-to-point\n!\n!\nrouter ospf6\n ospf6 router-id 10.0.0.10\n timers lsa min-arrival 100\n timers throttle spf 10 50 500\n\n\nexit\n\n!\ndo write\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r1

TASK [template] ****************************************************************
changed: [r1]

TASK [set_fact] ****************************************************************
ok: [r1]

TASK [run /tmp/config.sh to deploy ospf config from /work/netlab_cicd/hogs/node_files/r1/ospf] ***
skipping: [r1]

TASK [run vtysh to import ospf config from /work/netlab_cicd/hogs/node_files/r1/ospf] ***
changed: [r1]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [r1]

TASK [Find configuration template for bgp] *************************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r1] => {
    "msg": "bgp configuration for r1\n=========================================\n!\nrouter bgp 65000\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.10\n!\n  neighbor 2001:db8:1::1 remote-as 65000\n  neighbor 2001:db8:1::1 description dut\n  neighbor 2001:db8:1::1 update-source lo\n!\n  neighbor 2001:db8:1::2 remote-as 65000\n  neighbor 2001:db8:1::2 description rr2\n  neighbor 2001:db8:1::2 update-source lo\n!\n address-family ipv6 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 2001:db8:1::a/128\n  network 2001:db8:cafe:1::/64\n!\n  neighbor 2001:db8:1::1 activate\n  neighbor 2001:db8:1::1 next-hop-self\n  no neighbor 2001:db8:1::1 send-community all\n  neighbor 2001:db8:1::1 send-community standard\n  neighbor 2001:db8:1::1 send-community large\n  neighbor 2001:db8:1::1 send-community extended\n!\n  neighbor 2001:db8:1::2 activate\n  neighbor 2001:db8:1::2 next-hop-self\n  no neighbor 2001:db8:1::2 send-community all\n  neighbor 2001:db8:1::2 send-community standard\n  neighbor 2001:db8:1::2 send-community large\n  neighbor 2001:db8:1::2 send-community extended\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r1

TASK [template] ****************************************************************
changed: [r1]

TASK [set_fact] ****************************************************************
ok: [r1]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/hogs/node_files/r1/bgp] ***
skipping: [r1]

TASK [run vtysh to import bgp config from /work/netlab_cicd/hogs/node_files/r1/bgp] ***
changed: [r1]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [r2]

TASK [Find configuration template for ospf] ************************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r2] => {
    "msg": "ospf configuration for r2\n=========================================\n!\n! OSPFv3 FRR configuration\n!\ninterface lo\n! \n ipv6 ospf6 area 0.0.0.0\n!\ninterface eth1\n! r2 -> r1\n ipv6 ospf6 area 0.0.0.0\n ipv6 ospf6 network point-to-point\n!\n!\nrouter ospf6\n ospf6 router-id 10.0.0.3\n timers lsa min-arrival 100\n timers throttle spf 10 50 500\n\n\nexit\n\n!\ndo write\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r2

TASK [template] ****************************************************************
changed: [r2]

TASK [set_fact] ****************************************************************
ok: [r2]

TASK [run /tmp/config.sh to deploy ospf config from /work/netlab_cicd/hogs/node_files/r2/ospf] ***
skipping: [r2]

TASK [run vtysh to import ospf config from /work/netlab_cicd/hogs/node_files/r2/ospf] ***
changed: [r2]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [r2]

TASK [Find configuration template for bgp] *************************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r2] => {
    "msg": "bgp configuration for r2\n=========================================\n!\nrouter bgp 65000\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.3\n!\n  neighbor 2001:db8:1::1 remote-as 65000\n  neighbor 2001:db8:1::1 description dut\n  neighbor 2001:db8:1::1 update-source lo\n!\n  neighbor 2001:db8:1::2 remote-as 65000\n  neighbor 2001:db8:1::2 description rr2\n  neighbor 2001:db8:1::2 update-source lo\n!\n address-family ipv6 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 2001:db8:1::3/128\n!\n  neighbor 2001:db8:1::1 activate\n  neighbor 2001:db8:1::1 next-hop-self\n  no neighbor 2001:db8:1::1 send-community all\n  neighbor 2001:db8:1::1 send-community standard\n  neighbor 2001:db8:1::1 send-community large\n  neighbor 2001:db8:1::1 send-community extended\n!\n  neighbor 2001:db8:1::2 activate\n  neighbor 2001:db8:1::2 next-hop-self\n  no neighbor 2001:db8:1::2 send-community all\n  neighbor 2001:db8:1::2 send-community standard\n  neighbor 2001:db8:1::2 send-community large\n  neighbor 2001:db8:1::2 send-community extended\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r2

TASK [template] ****************************************************************
changed: [r2]

TASK [set_fact] ****************************************************************
ok: [r2]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/hogs/node_files/r2/bgp] ***
skipping: [r2]

TASK [run vtysh to import bgp config from /work/netlab_cicd/hogs/node_files/r2/bgp] ***
changed: [r2]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [x1]

TASK [Find configuration template for ospf] ************************************
skipping: [x1]

TASK [fail] ********************************************************************
skipping: [x1]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [x1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [x1]

TASK [Deploy ospf configuration] ***********************************************
skipping: [x1]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [x1]

TASK [Find configuration template for bgp] *************************************
ok: [x1]

TASK [fail] ********************************************************************
skipping: [x1]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [x1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [x1] => {
    "msg": "bgp configuration for x1\n=========================================\n!\nrouter bgp 65101\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.4\n!\n  neighbor 2001:db8:3:3::1 remote-as 65000\n  neighbor 2001:db8:3:3::1 description dut\n!\n address-family ipv6 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 2001:db8:cafe:e::/64\n!\n  neighbor 2001:db8:3:3::1 activate\n  no neighbor 2001:db8:3:3::1 send-community all\n  neighbor 2001:db8:3:3::1 send-community standard\n  neighbor 2001:db8:3:3::1 send-community large\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for x1

TASK [template] ****************************************************************
changed: [x1]

TASK [set_fact] ****************************************************************
ok: [x1]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/hogs/node_files/x1/bgp] ***
skipping: [x1]

TASK [run vtysh to import bgp config from /work/netlab_cicd/hogs/node_files/x1/bgp] ***
changed: [x1]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
dut                        : ok=36   changed=3    unreachable=0    failed=0    skipped=6    rescued=0    ignored=0   
r1                         : ok=36   changed=7    unreachable=0    failed=0    skipped=12   rescued=0    ignored=0   
r2                         : ok=36   changed=7    unreachable=0    failed=0    skipped=12   rescued=0    ignored=0   
rr2                        : ok=36   changed=7    unreachable=0    failed=0    skipped=12   rescued=0    ignored=0   
x1                         : ok=29   changed=5    unreachable=0    failed=0    skipped=15   rescued=0    ignored=0   


Warning: The following warnings were generated during the 'netlab initial' processing
Warning: ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
[CREATED] dut: initial,ospf,bgp
[CREATED] rr2: initial,ospf,bgp
[CREATED] r1: initial,ospf,bgp
[CREATED] r2: initial,ospf,bgp
[CREATED] x1: initial,bgp


Use this topology to test the IBGP RR implementation (rr-clients and
cluster-id) and next-hop handling (change next hop on EBGP but not on
reflected route) on IPv6 IBGP sessions.