[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] ok: [r2] ok: [r4] ok: [r1] ok: [r3] TASK [Find device readiness script] ******************************************** ok: [dut] ok: [r2] ok: [r1] ok: [r3] ok: [r4] TASK [Wait for device to become ready] ***************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/routeros7.yml for dut included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/eos-clab.yml for r1, r2, r3, r4 TASK [Execute local ssh command to check router readiness] ********************* skipping: [dut] TASK [Wait for cEOS SSH daemon to start] *************************************** ok: [r2] ok: [r4] ok: [r1] ok: [r3] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, r1, r2, r3, r4 TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [dut] ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [Find configuration template for normalize] ******************************* ok: [dut] ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [fail] ******************************************************************** skipping: [dut] skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Find configuration deployment deploy_script for normalize] *************** ok: [dut] ok: [r1] ok: [r2] ok: [r4] ok: [r3] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [dut] ok: [r1] => msg: |- normalize configuration for r1 ========================================= ! interface Ethernet1 shutdown mac-address 52dc.cafe.0b01 ok: [r2] => msg: |- normalize configuration for r2 ========================================= ! interface Ethernet1 shutdown mac-address 52dc.cafe.0c01 ok: [r3] => msg: |- normalize configuration for r3 ========================================= ! interface Ethernet1 shutdown mac-address 52dc.cafe.1701 ok: [r4] => msg: |- normalize configuration for r4 ========================================= ! interface Ethernet1 shutdown mac-address 52dc.cafe.1801 TASK [Deploy normalize configuration] ****************************************** skipping: [dut] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 TASK [eos_config: deploying normalize from /home/pipi/netlab_gh/netsim/ansible/templates/normalize/eos.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [r1] changed: [r2] changed: [r4] changed: [r3] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, r1, r2, r3, r4 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [dut] ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [Find configuration template for initial] ********************************* ok: [dut] ok: [r1] ok: [r2] ok: [r4] ok: [r3] TASK [fail] ******************************************************************** skipping: [dut] skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [dut] ok: [r1] ok: [r2] ok: [r4] ok: [r3] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => msg: |- initial configuration for dut ========================================= /system identity set name="dut" /interface bridge add name=loopback protocol-mode=none /ip address add interface=loopback address=10.0.0.1/32 /ipv6 address add interface=loopback address=2001:db8:1:1::1/64 /ip/vrf/add place-before=0 name=blue interfaces=ether4,ether5 /ip/vrf/add place-before=0 name=red interfaces=ether2,ether3 /interface ethernet set comment="dut -> r1 [external]" ether2 /ip address add interface=ether2 address=10.1.0.1/30 /ip address set [find where interface=ether2] comment="dut -> r1 [external]" /interface ethernet set comment="dut -> r2 [external]" ether3 /ip address add interface=ether3 address=10.1.0.5/30 /ip address set [find where interface=ether3] comment="dut -> r2 [external]" /interface ethernet set comment="dut -> r3 [external]" ether4 /ip address add interface=ether4 address=10.1.0.9/30 /ip address set [find where interface=ether4] comment="dut -> r3 [external]" /interface ethernet set comment="dut -> r4 [external]" ether5 /ip address add interface=ether5 address=10.1.0.13/30 /ip address set [find where interface=ether5] comment="dut -> r4 [external]" /ip neighbor discovery-settings set discover-interface-list=all ok: [r1] => msg: |- initial configuration for r1 ========================================= hostname r1 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host dut 10.0.0.1 ip host dut-blue 10.1.0.9 10.1.0.13 ip host dut-red 10.1.0.1 10.1.0.5 ip host r2 10.0.0.12 10.1.0.6 ip host r3 10.0.0.23 10.1.0.10 ip host r4 10.0.0.24 10.1.0.14 ipv6 host dut 2001:db8:1:1::1 ipv6 host r2 2001:db8:1:c::1 ipv6 host r3 2001:db8:1:17::1 ipv6 host r4 2001:db8:1:18::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.11/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:b::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r1 -> dut [external] ip address 10.1.0.2/30 ! mac-address 52dc.cafe.0b01 no shutdown ! ok: [r2] => msg: |- initial configuration for r2 ========================================= hostname r2 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host dut 10.0.0.1 ip host dut-blue 10.1.0.9 10.1.0.13 ip host dut-red 10.1.0.1 10.1.0.5 ip host r1 10.0.0.11 10.1.0.2 ip host r3 10.0.0.23 10.1.0.10 ip host r4 10.0.0.24 10.1.0.14 ipv6 host dut 2001:db8:1:1::1 ipv6 host r1 2001:db8:1:b::1 ipv6 host r3 2001:db8:1:17::1 ipv6 host r4 2001:db8:1:18::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.12/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:c::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r2 -> dut [external] ip address 10.1.0.6/30 ! mac-address 52dc.cafe.0c01 no shutdown ! ok: [r4] => msg: |- initial configuration for r4 ========================================= hostname r4 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host dut 10.0.0.1 ip host dut-blue 10.1.0.9 10.1.0.13 ip host dut-red 10.1.0.1 10.1.0.5 ip host r1 10.0.0.11 10.1.0.2 ip host r2 10.0.0.12 10.1.0.6 ip host r3 10.0.0.23 10.1.0.10 ipv6 host dut 2001:db8:1:1::1 ipv6 host r1 2001:db8:1:b::1 ipv6 host r2 2001:db8:1:c::1 ipv6 host r3 2001:db8:1:17::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.24/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:18::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r4 -> dut [external] ip address 10.1.0.14/30 ! mac-address 52dc.cafe.1801 no shutdown ! ok: [r3] => msg: |- initial configuration for r3 ========================================= hostname r3 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host dut 10.0.0.1 ip host dut-blue 10.1.0.9 10.1.0.13 ip host dut-red 10.1.0.1 10.1.0.5 ip host r1 10.0.0.11 10.1.0.2 ip host r2 10.0.0.12 10.1.0.6 ip host r4 10.0.0.24 10.1.0.14 ipv6 host dut 2001:db8:1:1::1 ipv6 host r1 2001:db8:1:b::1 ipv6 host r2 2001:db8:1:c::1 ipv6 host r4 2001:db8:1:18::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.23/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:17::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r3 -> dut [external] ip address 10.1.0.10/30 ! mac-address 52dc.cafe.1701 no shutdown ! TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/routeros7.yml for dut included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 TASK [load initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/routeros7.j2] *** ok: [dut] TASK [Run commands on CHR] ***************************************************** changed: [dut] TASK [eos_config: deploying initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/eos.j2] *** changed: [r2] changed: [r4] changed: [r1] changed: [r3] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] ok: [r1] ok: [r2] ok: [r4] ok: [r3] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, r1, r2, r3, r4 => (item=bgp) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, r1, r2, r3, r4 => (item=vrf) TASK [Figure out whether to deploy the module bgp on current device] *********** ok: [dut] ok: [r1] ok: [r4] ok: [r2] ok: [r3] TASK [Find configuration template for bgp] ************************************* ok: [dut] ok: [r1] ok: [r3] ok: [r2] ok: [r4] TASK [fail] ******************************************************************** skipping: [dut] skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Find configuration deployment deploy_script for bgp] ********************* ok: [dut] ok: [r2] ok: [r1] ok: [r3] ok: [r4] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => msg: |- bgp configuration for dut ========================================= /routing/bgp/template add name=main as=65000 output.network=bgp-networks /routing/bgp/template set main router-id=10.0.0.1 # BGP Network now is controlled by simple ACL /ip/firewall/address-list/ add list=bgp-networks address=10.0.0.1/32 # BGP Network now is controlled by simple ACL /ip/firewall/address-list/ add list=bgp-networks address=2001:db8:1:1::/64 ok: [r1] => msg: |- bgp configuration for r1 ========================================= ! ! router bgp 65101 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.11 ! neighbor 10.1.0.1 remote-as 65000 neighbor 10.1.0.1 description dut neighbor 10.1.0.1 send-community standard large ! ! address-family ipv4 network 10.0.0.11/32 ! ! ! neighbor 10.1.0.1 activate ! address-family ipv6 network 2001:db8:1:b::/64 ! ! ! ! ok: [r2] => msg: |- bgp configuration for r2 ========================================= ! ! router bgp 65102 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.12 ! neighbor 10.1.0.5 remote-as 65000 neighbor 10.1.0.5 description dut neighbor 10.1.0.5 send-community standard large ! ! address-family ipv4 network 10.0.0.12/32 ! ! ! neighbor 10.1.0.5 activate ! address-family ipv6 network 2001:db8:1:c::/64 ! ! ! ! ok: [r3] => msg: |- bgp configuration for r3 ========================================= ! ! router bgp 65103 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.23 ! neighbor 10.1.0.9 remote-as 65000 neighbor 10.1.0.9 description dut neighbor 10.1.0.9 send-community standard large ! ! address-family ipv4 network 10.0.0.23/32 ! ! ! neighbor 10.1.0.9 activate ! address-family ipv6 network 2001:db8:1:17::/64 ! ! ! ! ok: [r4] => msg: |- bgp configuration for r4 ========================================= ! ! router bgp 65104 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.24 ! neighbor 10.1.0.13 remote-as 65000 neighbor 10.1.0.13 description dut neighbor 10.1.0.13 send-community standard large ! ! address-family ipv4 network 10.0.0.24/32 ! ! ! neighbor 10.1.0.13 activate ! address-family ipv6 network 2001:db8:1:18::/64 ! ! ! ! TASK [Deploy bgp configuration] ************************************************ included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/routeros7.yml for dut included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 TASK [load bgp from /home/pipi/netlab_gh/netsim/ansible/templates/bgp/routeros7.j2] *** ok: [dut] TASK [Run commands on CHR] ***************************************************** changed: [dut] TASK [eos_config: deploying bgp from /home/pipi/netlab_gh/netsim/ansible/templates/bgp/eos.j2] *** changed: [r2] changed: [r3] changed: [r4] changed: [r1] TASK [Figure out whether to deploy the module vrf on current device] *********** ok: [dut] ok: [r1] ok: [r2] ok: [r4] ok: [r3] TASK [Find configuration template for vrf] ************************************* skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] ok: [dut] TASK [fail] ******************************************************************** skipping: [dut] skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Find configuration deployment deploy_script for vrf] ********************* skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] ok: [dut] => msg: |- vrf configuration for dut ========================================= /routing/bgp/vpn add label-allocation-policy=per-vrf vrf=blue route-distinguisher=65000:2 import.route-targets=65000:2 export.route-targets=65000:2 export.redistribute=bgp,connected,ospf,static,vpn /routing/bgp/template add name=vrf_blue as=65000 output.network=bgp-networks-blue vrf=blue routing-table=blue output.redistribute=connected,bgp,bgp-mpls-vpn,vpn /routing/bgp/template set vrf_blue router-id=10.0.0.1 /routing/bgp/connection add template=vrf_blue name=10_1_0_10 remote.address=10.1.0.10 remote.as=65103 comment="r3" address-families=ip local.role=ebgp /routing/bgp/connection add template=vrf_blue name=10_1_0_14 remote.address=10.1.0.14 remote.as=65104 comment="r4" address-families=ip local.role=ebgp /routing/bgp/vpn add label-allocation-policy=per-vrf vrf=red route-distinguisher=65000:1 import.route-targets=65000:1 export.route-targets=65000:1 export.redistribute=bgp,connected,ospf,static,vpn /routing/bgp/template add name=vrf_red as=65000 output.network=bgp-networks-red vrf=red routing-table=red output.redistribute=connected,bgp,bgp-mpls-vpn,vpn /routing/bgp/template set vrf_red router-id=10.0.0.1 /routing/bgp/connection add template=vrf_red name=10_1_0_2 remote.address=10.1.0.2 remote.as=65101 comment="r1" address-families=ip local.role=ebgp /routing/bgp/connection add template=vrf_red name=10_1_0_6 remote.address=10.1.0.6 remote.as=65102 comment="r2" address-families=ip local.role=ebgp TASK [Deploy vrf configuration] ************************************************ skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/routeros7.yml for dut TASK [load vrf from /home/pipi/netlab_gh/netsim/ansible/templates/vrf/routeros7.j2] *** ok: [dut] TASK [Run commands on CHR] ***************************************************** changed: [dut] PLAY [Deploy custom deployment templates] ************************************** TASK [Run custom configuration deployment scripts] ***************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-custom-config.yml for r1, r2, r3, r4 => (item=bgp-xact) TASK [Find configuration template] ********************************************* ok: [r2] ok: [r3] ok: [r1] ok: [r4] TASK [fail] ******************************************************************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Check is the configuration template is a file] *************************** ok: [r3 -> localhost] ok: [r1 -> localhost] ok: [r4 -> localhost] ok: [r2 -> localhost] TASK [fail] ******************************************************************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Process template /home/pipi/net101/tools/tests/integration/vrf/bgp-xact.j2 for r1] *** skipping: [r1] skipping: [r3] skipping: [r2] skipping: [r4] TASK [Find custom configuration deployment script] ***************************** ok: [r1] ok: [r4] ok: [r2] ok: [r3] TASK [Run the configuration deployment script] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 TASK [eos_config: deploying bgp-xact from /home/pipi/net101/tools/tests/integration/vrf/bgp-xact.j2] *** changed: [r2] changed: [r3] changed: [r1] changed: [r4] PLAY RECAP ********************************************************************* dut : ok=32 changed=3 unreachable=0 failed=0 skipped=7 rescued=0 ignored=0 r1 : ok=34 changed=4 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 r2 : ok=34 changed=4 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 r3 : ok=34 changed=4 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 r4 : ok=34 changed=4 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 The device under test has two VRFs with two interfaces in each VRF. Routers are attached to those interfaces and run BGP with device under test. Assuming the multi-vrf test case succeeded, this one adds BGP routing with CE routers. * r1 and r2 should be able to ping each other * r3 and r4 should be able to ping each other * r1 should not be able to reach r3 The test also checks whether DUT unnecessarily enables IPv6 AF over IPv4 EBGP sessions