[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [dut] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [dut] TASK [Wait for device to become ready] ***************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/routeros7.yml for dut TASK [Execute local ssh command to check router readiness] ********************* skipping: [dut] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, dut TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [dut] TASK [Find configuration template for normalize] ******************************* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [dut] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [dut] TASK [Find configuration deployment deploy_script for normalize] *************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [dut] TASK [Deploy normalize configuration] ****************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [dut] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, dut TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [dut] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h3] ok: [h2] ok: [h4] ok: [dut] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [dut] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.0.2/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.2/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.1.3/24 dev eth1 2>/dev/null set -e ip addr add 172.16.1.3/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h3] => msg: |- initial configuration for h3 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.2.4/24 dev eth1 2>/dev/null set -e ip addr add 172.16.2.4/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h4] => msg: |- initial configuration for h4 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.3.5/24 dev eth1 2>/dev/null set -e ip addr add 172.16.3.5/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [dut] => msg: |- initial configuration for dut ========================================= /system identity set name="dut" /interface bridge add name=loopback protocol-mode=none /interface bridge add name=loopback1 protocol-mode=none /interface bridge add name=loopback2 protocol-mode=none /ip address add interface=loopback address=10.0.0.1/32 /ip/vrf/add place-before=0 name=blue interfaces=ether4,ether5,loopback2 /ip/vrf/add place-before=0 name=red interfaces=ether2,ether3,loopback1 /interface ethernet set comment="dut -> h1 [stub]" ether2 /ip address add interface=ether2 address=172.16.0.1/24 /ip address set [find where interface=ether2] comment="dut -> h1 [stub]" /interface ethernet set comment="dut -> h2 [stub]" ether3 /ip address add interface=ether3 address=172.16.1.1/24 /ip address set [find where interface=ether3] comment="dut -> h2 [stub]" /interface ethernet set comment="dut -> h3 [stub]" ether4 /ip address add interface=ether4 address=172.16.2.1/24 /ip address set [find where interface=ether4] comment="dut -> h3 [stub]" /interface ethernet set comment="dut -> h4 [stub]" ether5 /ip address add interface=ether5 address=172.16.3.1/24 /ip address set [find where interface=ether5] comment="dut -> h4 [stub]" /interface ethernet set comment="VRF Loopback red" loopback1 /ip address add interface=loopback1 address=10.0.0.42/32 /ip address set [find where interface=loopback1] comment="VRF Loopback red" /interface ethernet set comment="VRF Loopback blue" loopback2 /ip address add interface=loopback2 address=10.0.0.43/32 /ip address set [find where interface=loopback2] comment="VRF Loopback blue" /ip neighbor discovery-settings set discover-interface-list=all TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2, h3, h4 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/routeros7.yml for dut TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Create a temporary file for the rendered script] ************************* changed: [h4 -> localhost] changed: [h1 -> localhost] changed: [h3 -> localhost] changed: [h2 -> localhost] TASK [Create container setup script from /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h1 -> localhost] changed: [h4 -> localhost] TASK [Copy script into running container at /tmp/config-h1_initial.sh] ********* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Execute /tmp/config-h1_initial.sh to deploy initial config based on /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2] *** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Container configuration for initial based on /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2 executed in netns] *** changed: [h1 -> localhost] changed: [h3 -> localhost] changed: [h2 -> localhost] changed: [h4 -> localhost] TASK [Remove temporary file /tmp/h1_initial-0mi_8yv9.sh] *********************** changed: [h4 -> localhost] changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] TASK [load initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/routeros7.j2] *** ok: [dut] TASK [Run commands on CHR] ***************************************************** changed: [dut] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [dut] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, h1, h2, h3, h4 => (item=vrf) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, h1, h2, h3, h4 => (item=routing) TASK [Figure out whether to deploy the module vrf on current device] *********** ok: [h1] ok: [h2] ok: [h4] ok: [h3] ok: [dut] TASK [Find configuration template for vrf] ************************************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [dut] TASK [fail] ******************************************************************** skipping: [dut] skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Find configuration deployment deploy_script for vrf] ********************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [dut] => msg: |- vrf configuration for dut ========================================= TASK [Deploy vrf configuration] ************************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/routeros7.yml for dut TASK [load vrf from /home/pipi/netlab_gh/netsim/ansible/templates/vrf/routeros7.j2] *** ok: [dut] TASK [Run commands on CHR] ***************************************************** changed: [dut] TASK [Figure out whether to deploy the module routing on current device] ******* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [dut] TASK [Find configuration template for routing] ********************************* skipping: [dut] ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [fail] ******************************************************************** skipping: [dut] skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Find configuration deployment deploy_script for routing] ***************** skipping: [dut] ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [dut] ok: [h1] => msg: |- routing configuration for h1 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.0.1 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.0.1 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.0.1 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.0.1 dev eth1 protocol static # # Print the final routing table ip route ok: [h2] => msg: |- routing configuration for h2 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.1.1 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.1.1 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.1.1 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.1.1 dev eth1 protocol static # # Print the final routing table ip route ok: [h3] => msg: |- routing configuration for h3 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.2.1 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.2.1 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.2.1 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.2.1 dev eth1 protocol static # # Print the final routing table ip route ok: [h4] => msg: |- routing configuration for h4 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.3.1 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.3.1 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.3.1 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.3.1 dev eth1 protocol static # # Print the final routing table ip route TASK [Deploy routing configuration] ******************************************** skipping: [dut] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2, h3, h4 TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Create a temporary file for the rendered script] ************************* changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Create container setup script from /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2] *** changed: [h2 -> localhost] changed: [h1 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Copy script into running container at /tmp/config-h1_routing.sh] ********* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Execute /tmp/config-h1_routing.sh to deploy routing config based on /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2] *** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Container configuration for routing based on /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2 executed in netns] *** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Remove temporary file /tmp/h1_routing-cks2uhda.sh] *********************** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h4 -> localhost] changed: [h3 -> localhost] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* dut : ok=26 changed=2 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 h1 : ok=31 changed=8 unreachable=0 failed=0 skipped=15 rescued=0 ignored=0 h2 : ok=31 changed=8 unreachable=0 failed=0 skipped=15 rescued=0 ignored=0 h3 : ok=31 changed=8 unreachable=0 failed=0 skipped=15 rescued=0 ignored=0 h4 : ok=31 changed=8 unreachable=0 failed=0 skipped=15 rescued=0 ignored=0 The device under test has two VRFs with two interfaces in each VRF. Each VRF has a loopback interface. * h1 and h2 should be able to ping each other and the VRF loopback interface * h3 and h4 should be able to ping each other and the VRF loopback interface * h1 should not be able to reach h3