02:04:16 INFO Containerlab started version=0.70.2 02:04:16 INFO Parsing & checking topology file=clab.yml 02:04:16 INFO Removing directory path=/work/netlab_cicd/clab-ml_17 02:04:16 INFO Creating docker network name=nl_mgmt_17 IPv4 subnet=192.168.17.0/24 IPv6 subnet="" MTU=0 02:04:16 INFO Creating lab directory path=/work/netlab_cicd/clab-ml_17 02:04:17 INFO Creating container name=pe2 02:04:17 INFO Creating container name=ce1 02:04:17 INFO Creating container name=ce2 02:04:17 INFO Creating container name=h1 02:04:17 INFO Creating container name=dut 02:04:17 INFO Creating container name=p 02:04:17 INFO Creating container name=h2 02:04:17 INFO Created link: pe2:eth1 ▪┄┄▪ p:eth2 02:04:18 INFO Created link: pe2:eth3 ▪┄┄▪ ce2:eth1 02:04:18 INFO Created link: pe2:eth2 ▪┄┄▪ h2:eth1 02:04:18 INFO Created link: dut:eth1 (Ethernet0/1) ▪┄┄▪ p:eth1 02:04:18 INFO Created link: dut:eth2 (Ethernet0/2) ▪┄┄▪ h1:eth1 02:04:18 INFO Running postdeploy actions for Cisco IOL 'dut' node 02:04:18 INFO Created link: dut:eth3 (Ethernet0/3) ▪┄┄▪ ce1:eth1 02:04:18 INFO Adding host entries path=/etc/hosts 02:04:18 INFO Adding SSH config for nodes path=/etc/ssh/ssh_config.d/clab-ml_17.conf 🎉 A newer containerlab version (0.71.1) is available! Release notes: https://containerlab.dev/rn/0.71/#0711 Run 'sudo clab version upgrade' or see https://containerlab.dev/install/ for installation options. ╭────────────────┬──────────────────────────────┬─────────┬────────────────╮ │ Name │ Kind/Image │ State │ IPv4/6 Address │ ├────────────────┼──────────────────────────────┼─────────┼────────────────┤ │ clab-ml_17-ce1 │ linux │ running │ 192.168.17.103 │ │ │ quay.io/frrouting/frr:10.4.1 │ │ N/A │ ├────────────────┼──────────────────────────────┼─────────┼────────────────┤ │ clab-ml_17-ce2 │ linux │ running │ 192.168.17.104 │ │ │ quay.io/frrouting/frr:10.4.1 │ │ N/A │ ├────────────────┼──────────────────────────────┼─────────┼────────────────┤ │ clab-ml_17-dut │ cisco_iol │ running │ 192.168.17.101 │ │ │ vrnetlab/cisco_iol:17.16.01a │ │ N/A │ ├────────────────┼──────────────────────────────┼─────────┼────────────────┤ │ clab-ml_17-h1 │ linux │ running │ 192.168.17.105 │ │ │ python:3.13-alpine │ │ N/A │ ├────────────────┼──────────────────────────────┼─────────┼────────────────┤ │ clab-ml_17-h2 │ linux │ running │ 192.168.17.106 │ │ │ python:3.13-alpine │ │ N/A │ ├────────────────┼──────────────────────────────┼─────────┼────────────────┤ │ clab-ml_17-p │ linux │ running │ 192.168.17.107 │ │ │ quay.io/frrouting/frr:10.4.1 │ │ N/A │ ├────────────────┼──────────────────────────────┼─────────┼────────────────┤ │ clab-ml_17-pe2 │ linux │ running │ 192.168.17.102 │ │ │ quay.io/frrouting/frr:10.4.1 │ │ N/A │ ╰────────────────┴──────────────────────────────┴─────────┴────────────────╯ Using transformed lab topology from snapshot file netlab.snapshot.pickle Checking virtualization provider installation OK: clab installed and working correctly Starting clab nodes provider clab: executing sudo -E containerlab deploy --reconfigure -t clab.yml Initial configuration skipped, run 'netlab initial' to configure the devices