[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned

PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [dut]
ok: [xr]

TASK [Find device readiness script] ********************************************
ok: [dut]
ok: [xr]

TASK [Wait for device to become ready] *****************************************
skipping: [dut]
skipping: [xr]

TASK [Normalize config on bridge-like devices] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, xr

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [dut]
ok: [xr]

TASK [Find configuration template for normalize] *******************************
ok: [dut]
ok: [xr]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [xr]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [dut]
skipping: [xr]

TASK [Find configuration deployment deploy_script for normalize] ***************
skipping: [dut]
skipping: [xr]

TASK [Deploy normalize configuration] ******************************************
skipping: [dut]
skipping: [xr]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, xr

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [dut]
ok: [xr]

TASK [Find configuration template for initial] *********************************
ok: [dut]
ok: [xr]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [xr]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => 
  msg: |-
    initial configuration for dut
    =========================================
    #!/bin/bash
    #
    # This script contains the 'ip' commands needed to set up container
    # interfaces and route table. It's executed within the container
    # network namespace on the container host.
    #
    #  /etc/hosts file is generated as a clab bind.
    #
    set -e
  
    ### One-Shot configuration (non-Ubuntu VM or container)
    #
    # Disable IPv4 and IPv6 forwarding
    #
    sysctl -w net.ipv4.ip_forward=0
    sysctl -w net.ipv6.conf.all.forwarding=0
    #
    # Interface addressing, create any bond devices
    #
    if [ ! -e /sys/class/net/bond1 ]; then
    ip link add dev bond1 type bond mode 802.3ad lacp_rate fast lacp_active on
    fi
  
    ip link set dev bond1 up
    set +e
    ip addr del 172.16.0.1/24 dev bond1 2>/dev/null
    set -e
    ip addr add 172.16.0.1/24 dev bond1
    ip link set dev bond1 mtu 1500
    ip link set dev eth1 up
    ip link set dev eth1 mtu 1500
    ip link set dev eth2 up
    ip link set dev eth2 mtu 1500
    #
    # Add static routes (usually IPv4 routes pointing to the first usable gateway)
    #
    echo Removing existing IPv4 routes
    while ip route del 172.16.0.0/16 2>/dev/null; do
      : ; done
    while ip route del 10.0.0.0/24 2>/dev/null; do
      : ; done
    while ip route del 10.1.0.0/16 2>/dev/null; do
      : ; done
    while ip route del 10.2.0.0/24 2>/dev/null; do
      : ; done
    #
    #
    echo Adding direct static routes
    ip route add 172.16.0.0/16 via 172.16.0.2 dev bond1 protocol static
    ip route add 10.0.0.0/24 via 172.16.0.2 dev bond1 protocol static
    ip route add 10.1.0.0/16 via 172.16.0.2 dev bond1 protocol static
    ip route add 10.2.0.0/24 via 172.16.0.2 dev bond1 protocol static
    #
    # Print the final routing table
    ip route
    #
    set -e
    ip addr add fe80::1/64 dev lo scope link
ok: [xr] => 
  msg: |-
    initial configuration for xr
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)# "
    echo
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks, stub and lag/bond devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
    if [ ! -e /sys/class/net/bond1 ]; then
      if [ ! -e /sys/devices/virtual/net/bond1 ]; then
    if [ ! -e /sys/class/net/bond1 ]; then
    ip link add dev bond1 type bond mode 802.3ad lacp_rate fast lacp_active on
    fi
  
        ip link set dev bond1 up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.bond1.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth1.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth2.disable_ipv6=1
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set dev bond1 mtu 1500
    ip link set dev eth1 mtu 1500
    ip link set dev eth2 mtu 1500
  
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname xr
    !
    vrf mgmt
     exit-vrf
    !
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.2/32
    !
    interface bond1
     no shutdown
     description xr -> dut
     ip address 172.16.0.2/24
    !
    interface eth1
     no shutdown
     description xr -> dut
     ! no ip address
    !
    interface eth2
     no shutdown
     description xr -> dut
     ! no ip address
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [dut]
ok: [xr]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/linux-clab.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/initial-clab.yml for xr

TASK [Define script filename and determine whether to execute in netns] ********
ok: [dut]

TASK [Create a temporary file for the rendered script] *************************
changed: [dut -> localhost]

TASK [Create container setup script from /home/pipi/net101/tools/netsim/ansible/templates/initial/bird-clab.j2] ***
changed: [dut -> localhost]

TASK [Copy script into running container at /tmp/config-dut_initial.sh] ********
skipping: [dut]

TASK [Execute /tmp/config-dut_initial.sh to deploy initial config based on /home/pipi/net101/tools/netsim/ansible/templates/initial/bird-clab.j2] ***
skipping: [dut]

TASK [Container configuration for initial based on /home/pipi/net101/tools/netsim/ansible/templates/initial/bird-clab.j2 executed in netns] ***
changed: [dut -> localhost]

TASK [Remove temporary file /tmp/dut_initial-d8d_mh0m.sh] **********************
changed: [dut -> localhost]

TASK [Attempt to load VRF kernel module] ***************************************
changed: [xr -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [xr]

TASK [include_tasks] ***********************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/deploy-config.yml for xr

TASK [template] ****************************************************************
changed: [xr]

TASK [set_fact] ****************************************************************
ok: [xr]

TASK [run /tmp/config.sh to deploy initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
changed: [xr]

TASK [run vtysh to import initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
skipping: [xr]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [dut]
ok: [xr]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, xr => (item=lag)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, xr => (item=ospf)

TASK [Figure out whether to deploy the module lag on current device] ***********
ok: [dut]
ok: [xr]

TASK [Find configuration template for lag] *************************************
ok: [dut]
ok: [xr]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [xr]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => 
  msg: |-
    lag configuration for dut
    =========================================
    #!/bin/bash
    #
    set -e # Exit immediately when any command fails
    #
    # Bond devices are created by 'initial' module - add members
    #
    ip link set dev eth1 down
    ip link set dev eth1 master bond1
    ip link set dev eth1 up
    ip link set dev eth2 down
    ip link set dev eth2 master bond1
    ip link set dev eth2 up
    ip link set dev bond1 up
    exit 0
  
    #
    # Note: The above script is executed within the netns context on the host
    #
ok: [xr] => 
  msg: |-
    lag configuration for xr
    =========================================
    #!/bin/bash
    #
    set -e # Exit immediately when any command fails
    #
    # Bond devices are created by 'initial' module - add members
    #
    ip link set dev eth1 down
    ip link set dev eth1 master bond1
    ip link set dev eth1 up
    ip link set dev eth2 down
    ip link set dev eth2 master bond1
    ip link set dev eth2 up
    ip link set dev bond1 up
    exit 0

TASK [Find configuration deployment deploy_script for lag] *********************
ok: [dut]
ok: [xr]

TASK [Deploy lag configuration] ************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/linux-clab.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for xr

TASK [Define script filename and determine whether to execute in netns] ********
ok: [dut]

TASK [Create a temporary file for the rendered script] *************************
changed: [dut -> localhost]

TASK [Create container setup script from /home/pipi/net101/tools/netsim/ansible/templates/lag/linux-clab.j2] ***
changed: [dut -> localhost]

TASK [Copy script into running container at /tmp/config-dut_lag.sh] ************
skipping: [dut]

TASK [Execute /tmp/config-dut_lag.sh to deploy lag config based on /home/pipi/net101/tools/netsim/ansible/templates/lag/linux-clab.j2] ***
skipping: [dut]

TASK [Container configuration for lag based on /home/pipi/net101/tools/netsim/ansible/templates/lag/linux-clab.j2 executed in netns] ***
changed: [dut -> localhost]

TASK [Remove temporary file /tmp/dut_lag-7un60xgo.sh] **************************
changed: [dut -> localhost]

TASK [template] ****************************************************************
changed: [xr]

TASK [set_fact] ****************************************************************
ok: [xr]

TASK [run /tmp/config.sh to deploy lag config from /home/pipi/net101/tools/netsim/ansible/templates/lag/frr.j2] ***
changed: [xr]

TASK [run vtysh to import lag config from /home/pipi/net101/tools/netsim/ansible/templates/lag/frr.j2] ***
skipping: [xr]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [dut]
ok: [xr]

TASK [Find configuration template for ospf] ************************************
skipping: [dut]
ok: [xr]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [xr]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [dut]
ok: [xr] => 
  msg: |-
    ospf configuration for xr
    =========================================
    !
    ! OSPFv2 FRR configuration
    !
    router ospf
     ospf router-id 10.0.0.2
     timers throttle spf 10 50 500
     timers throttle lsa all 100
     timers lsa min-arrival 100
  
  
    exit
    !
    interface lo
    !
     ip ospf area 0.0.0.0
    !
    interface bond1
    ! xr -> dut
     ip ospf area 0.0.0.0
     ip ospf network point-to-point
    !
  
    !
    do write

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [dut]
ok: [xr]

TASK [Deploy ospf configuration] ***********************************************
skipping: [dut]
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for xr

TASK [template] ****************************************************************
changed: [xr]

TASK [set_fact] ****************************************************************
ok: [xr]

TASK [run /tmp/config.sh to deploy ospf config from /home/pipi/net101/tools/netsim/ansible/templates/ospf/frr.j2] ***
skipping: [xr]

TASK [run vtysh to import ospf config from /home/pipi/net101/tools/netsim/ansible/templates/ospf/frr.j2] ***
changed: [xr]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
dut                        : ok=30   changed=8    unreachable=0    failed=0    skipped=16   rescued=0    ignored=0   
xr                         : ok=35   changed=7    unreachable=0    failed=0    skipped=12   rescued=0    ignored=0   



The device under is a router with a L3 LAG link connected to a FRR device. The
devices should be able to establish an OSPF adjacency.