[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Wait for device to become ready] ***************************************** skipping: [dut] skipping: [h1] skipping: [h2] skipping: [srv] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, h1, h2, srv TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => msg: |- initial configuration for dut ========================================= hostname dut ! lldp ! vrf blue rd 65000:2 ! address-family ipv4 unicast route-target import 65000:2 route-target import 65000:3 route-target export 65000:2 exit-address-family vrf common rd 65000:3 ! address-family ipv4 unicast route-target import 65000:1 route-target import 65000:2 route-target import 65000:3 route-target export 65000:3 exit-address-family vrf red rd 65000:1 ! address-family ipv4 unicast route-target import 65000:1 route-target import 65000:3 route-target export 65000:1 exit-address-family interface loopback 0 ip address 10.0.0.4/32 ! interface mgmt no lldp transmit no lldp receive ! interface 1/1/1 shutdown mtu 9198 vrf attach red description dut -> h1 [stub] ip address 172.16.0.4/24 no shutdown ! interface 1/1/2 shutdown mtu 9198 vrf attach blue description dut -> h2 [stub] ip address 172.16.1.4/24 no shutdown ! interface 1/1/3 shutdown mtu 9198 vrf attach common description dut -> srv [stub] ip address 172.16.2.4/24 no shutdown ! ! ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.0.1/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.1/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # lan prefix: 172.16.0.0/16 local subnet: 172.16.0.0/24 set +e ip route del 172.16.0.0/16 2>/dev/null set -e ip route add 172.16.0.0/16 via 172.16.0.4 # loopback prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24 set +e ip route del 10.0.0.0/24 2>/dev/null set -e ip route add 10.0.0.0/24 via 172.16.0.4 # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.0.0/24 # p2p prefix: 10.1.0.0/16 local subnet: 172.16.0.0/24 set +e ip route del 10.1.0.0/16 2>/dev/null set -e ip route add 10.1.0.0/16 via 172.16.0.4 # router_id prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24 # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.0.0/24 set +e ip route del 10.2.0.0/24 2>/dev/null set -e ip route add 10.2.0.0/24 via 172.16.0.4 # # Print the final routing table ip route ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.1.2/24 dev eth1 2>/dev/null set -e ip addr add 172.16.1.2/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # lan prefix: 172.16.0.0/16 local subnet: 172.16.1.0/24 set +e ip route del 172.16.0.0/16 2>/dev/null set -e ip route add 172.16.0.0/16 via 172.16.1.4 # loopback prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24 set +e ip route del 10.0.0.0/24 2>/dev/null set -e ip route add 10.0.0.0/24 via 172.16.1.4 # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.1.0/24 # p2p prefix: 10.1.0.0/16 local subnet: 172.16.1.0/24 set +e ip route del 10.1.0.0/16 2>/dev/null set -e ip route add 10.1.0.0/16 via 172.16.1.4 # router_id prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24 # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.1.0/24 set +e ip route del 10.2.0.0/24 2>/dev/null set -e ip route add 10.2.0.0/24 via 172.16.1.4 # # Print the final routing table ip route ok: [srv] => msg: |- initial configuration for srv ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up set +e ip addr del 172.16.2.3/24 dev eth1 2>/dev/null set -e ip addr add 172.16.2.3/24 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # lan prefix: 172.16.0.0/16 local subnet: 172.16.2.0/24 set +e ip route del 172.16.0.0/16 2>/dev/null set -e ip route add 172.16.0.0/16 via 172.16.2.4 # loopback prefix: 10.0.0.0/24 local subnet: 172.16.2.0/24 set +e ip route del 10.0.0.0/24 2>/dev/null set -e ip route add 10.0.0.0/24 via 172.16.2.4 # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.2.0/24 # p2p prefix: 10.1.0.0/16 local subnet: 172.16.2.0/24 set +e ip route del 10.1.0.0/16 2>/dev/null set -e ip route add 10.1.0.0/16 via 172.16.2.4 # router_id prefix: 10.0.0.0/24 local subnet: 172.16.2.0/24 # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.2.0/24 set +e ip route del 10.2.0.0/24 2>/dev/null set -e ip route add 10.2.0.0/24 via 172.16.2.4 # # Print the final routing table ip route TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [srv] ok: [dut] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/arubacx.yml for dut included: /home/pipi/net101/tools/netsim/ansible/tasks/linux/initial-clab.yml for h1, h2, srv TASK [tempfile] **************************************************************** changed: [dut -> localhost] TASK [template] **************************************************************** changed: [dut -> localhost] TASK [aoscx_config: set session auto-confirm for initial] ********************** changed: [dut] TASK [aoscx_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/arubacx.j2] *** changed: [dut] TASK [file] ******************************************************************** changed: [dut -> localhost] TASK [set_fact] **************************************************************** ok: [h1] ok: [h2] ok: [srv] TASK [Create initial container setup from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [srv -> localhost] changed: [h2 -> localhost] changed: [h1 -> localhost] TASK [Initial container configuration via /tmp/config-kxlRcBRS-h1.sh] ********** changed: [srv -> localhost] changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [file] ******************************************************************** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [srv -> localhost] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut => (item=vrf) TASK [Figure out whether to deploy the module vrf on current device] *********** ok: [dut] TASK [Find configuration template for vrf] ************************************* ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => msg: |- vrf configuration for dut ========================================= ! router bgp 65000 vrf blue bgp router-id 10.0.0.4 address-family ipv4 unicast redistribute local loopback redistribute connected ! ! vrf common bgp router-id 10.0.0.4 address-family ipv4 unicast redistribute local loopback redistribute connected ! ! vrf red bgp router-id 10.0.0.4 address-family ipv4 unicast redistribute local loopback redistribute connected ! ! TASK [Find configuration deployment deploy_script for vrf] ********************* ok: [dut] TASK [Deploy vrf configuration] ************************************************ included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/arubacx.yml for dut TASK [tempfile] **************************************************************** changed: [dut -> localhost] TASK [template] **************************************************************** changed: [dut -> localhost] TASK [aoscx_config: set session auto-confirm for vrf] ************************** changed: [dut] TASK [aoscx_config: deploying vrf from /home/pipi/net101/tools/netsim/ansible/templates/vrf/arubacx.j2] *** changed: [dut] TASK [file] ******************************************************************** changed: [dut -> localhost] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* dut : ok=25 changed=10 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h1 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 h2 : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 srv : ok=12 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 The device under test has two user VRFs and a common services VRF. The lab tests inter-VRF route leaking between common VRF and other VRFs * h1 and h2 should be able to ping srv but not each other