Integration Test Results (Release 26.01)

Test	Supported	Lab started	Devices configured	Validated	Netlab version	Test date	Device image
01-network		✅	✅	✅	26.01	2025-12-26 21:57:00	juniper/vptx:25.2R1.8
02-areas		✅	✅	✅	26.01	2025-12-26 21:59:44	juniper/vptx:25.2R1.8
03-cost		✅	✅	✅	26.01	2025-12-26 22:02:24	juniper/vptx:25.2R1.8
04-passive		✅	✅	✅	26.01	2025-12-26 22:05:10	juniper/vptx:25.2R1.8
05-unnumbered		✅	✅	✅	26.01	2025-12-26 22:07:45	juniper/vptx:25.2R1.8
06-lb-prefix		✅	✅	✅	26.01	2025-12-26 22:10:18	juniper/vptx:25.2R1.8
07-vlan-mtu		✅	✅	✅	26.01	2025-12-26 22:13:05	juniper/vptx:25.2R1.8
10-import	❌				26.01	2025-12-26 22:13:09
11-import-policy	❌				26.01	2025-12-26 22:13:10
20-default	❌				26.01	2025-12-26 22:13:10
21-default-policy	❌				26.01	2025-12-26 22:13:11
22-default-vrf	❌				26.01	2025-12-28 13:34:38
30-timers	❌				26.01	2025-12-26 22:13:12
31-priority	❌				26.01	2025-12-26 22:13:12
40-area-parameters		✅	✅	✅	26.01	2025-12-26 22:16:18	juniper/vptx:25.2R1.8

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices