Integration Test Results (Release 25.10)

Test	Supported	Lab started	Devices configured	Validated	Netlab version	Test date	Device image
01-network		✅	✅	✅	25.07	2025-07-10 21:10:20	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
02-areas		✅	✅	✅	25.07	2025-07-10 21:12:44	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
03-cost		✅	✅	✅	25.07	2025-07-10 21:15:00	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
04-passive		✅	✅	✅	25.07	2025-07-10 21:17:29	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
05-unnumbered		✅	✅	✅	25.07	2025-07-10 21:19:38	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
06-lb-prefix		✅	✅	✅	25.07	2025-07-10 21:21:47	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
07-vlan-mtu		✅	✅	✅	25.07	2025-07-10 21:24:15	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
10-import	❌				25.07	2025-07-10 21:24:19
11-import-policy	❌				25.07	2025-07-10 21:24:20
20-default	❌				25.07	2025-07-10 21:24:21
21-default-policy	❌				25.07	2025-07-10 21:24:21
22-default-vrf	❌				25.07	2025-07-10 21:24:22
30-timers	❌				25.07	2025-07-10 21:24:23
31-priority	❌				25.07	2025-07-10 21:24:24
40-area-parameters		✅	✅	✅	25.07	2025-07-10 21:26:56	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices