Integration Test Results (Release 1.9.4-post2)

Test	Supported	Lab started	Devices configured	Validated	Netlab version	Test date
01-network		✅	✅	✅	1.9.4	2025-01-25 04:21:39
02-areas		✅	✅	✅	1.9.4	2025-01-25 04:22:10
03-cost		✅	✅	✅	1.9.4	2025-01-25 04:22:46
04-passive		✅	✅	✅	1.9.4	2025-01-25 04:23:31
05-unnumbered		✅	✅	✅	1.9.4	2025-01-25 04:23:59
06-lb-prefix		✅	✅	❌ (more)	1.9.4	2025-01-25 04:24:41
SR Linux advertises IPv6 loopback prefixes with /64 prefix length (see RFC 5340, section 4.4.3.9)
07-vlan-mtu	❌				1.9.4	2025-01-28 07:51:35
OSPFv3 works over VLAN interface on SR Linux. SR Linux does not accept MTU values lower than 1436.
10-import		✅	✅	✅	1.9.4	2025-01-25 04:25:15
11-import-policy	❌				1.9.4	2025-01-25 04:25:16
20-default		✅	✅	✔	1.9.4	2025-01-25 04:25:56
SR Linux cannot set OSPF metric or metric type on default route redistributed into OSPF
21-default-policy	❌				1.9.4	2025-01-25 04:25:58
22-default-vrf		✅	✅	✅	1.9.4	2025-01-25 04:26:36
30-timers	❌				1.9.4	2025-01-25 04:26:38
31-priority	❌				1.9.4	2025-01-25 04:26:38

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices