Integration Test Results (Release 1.9.4-post2)

Test	Supported	Lab started	Devices configured	Validated	Netlab version	Test date
01-network		✅	✅	✅	1.9.4	2025-01-25 04:16:28
02-areas		✅	✅	✅	1.9.4	2025-01-25 04:17:04
03-cost		✅	✅	✅	1.9.4	2025-01-25 04:17:39
04-passive		✅	✅	✅	1.9.4	2025-01-25 04:18:25
05-unnumbered		✅	✅	✅	1.9.4	2025-01-25 04:18:47
06-vlan-mtu	❌				1.9.4-post2	2025-02-07 07:41:22
OSPFv2 works over VLAN interface on SR Linux. SR Linux does not accept MTU values lower than 1436.
10-import		✅	✅	✅	1.9.4	2025-01-25 04:19:12
11-import-policy	❌				1.9.4	2025-01-25 04:19:14
20-default		✅	✅	✔	1.9.4	2025-01-25 04:19:51
SR Linux cannot set OSPF metric or metric type on default route redistributed into OSPF
21-default-policy	❌				1.9.4	2025-01-25 04:19:53
22-default-vrf		✅	✅	✅	1.9.4	2025-01-25 04:20:37
30-timers	❌				1.9.4	2025-01-25 04:20:39
31-priority	❌				1.9.4	2025-01-25 04:20:39
32-password	❌				1.9.4	2025-01-25 04:20:40

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices