Integration Test Results (Release 26.09)

Device	iol
Provider	clab
Test suite	ospf/ospfv3

Test	Supported	Lab started	Devices configured	Validated	Netlab version	Test date	Device image
01-network		✅	✅	✅	26.09	2026-08-21 16:24:59	vrnetlab/cisco_iol:17.18.02
02-areas		✅	✅	✅	26.09	2026-08-21 16:25:48	vrnetlab/cisco_iol:17.18.02
03-cost		✅	✅	✅	26.09	2026-08-21 16:26:33	vrnetlab/cisco_iol:17.18.02
04-passive		✅	✅	✅	26.09	2026-08-21 16:27:36	vrnetlab/cisco_iol:17.18.02
05-unnumbered		✅	✅	✅	26.09	2026-08-21 16:28:24	vrnetlab/cisco_iol:17.18.02
06-lb-prefix		✅	✅	✅	26.09	2026-08-21 16:29:13	vrnetlab/cisco_iol:17.18.02
07-vlan-mtu		✅	✅	✅	26.09	2026-08-21 16:29:57	vrnetlab/cisco_iol:17.18.02
08-dual-stack		✅	✅	✅	26.09	2026-08-21 16:30:46	vrnetlab/cisco_iol:17.18.02
10-import		✅	✅	✅	26.09	2026-08-21 16:31:42	vrnetlab/cisco_iol:17.18.02
11-import-policy		✅	✅	✅	26.09	2026-08-21 16:32:33	vrnetlab/cisco_iol:17.18.02
20-default		✅	✅	✅	26.09	2026-08-21 16:33:27	vrnetlab/cisco_iol:17.18.02
21-default-policy		✅	✅	✅	26.09	2026-08-21 16:34:26	vrnetlab/cisco_iol:17.18.02
22-default-vrf		✅	✅	✅	26.09	2026-08-21 16:35:19	vrnetlab/cisco_iol:17.18.02
30-timers		✅	✅	✅	26.09	2026-08-21 16:35:59	vrnetlab/cisco_iol:17.18.02
31-priority		✅	✅	✅	26.09	2026-08-21 16:37:22	vrnetlab/cisco_iol:17.18.02
40-area-parameters	✔	✅	✅	✔	26.09	2026-08-21 16:38:34	vrnetlab/cisco_iol:17.18.02
ospf: Cisco IOS cannot configure NSSA type-7 ranges ospf: Cisco IOS cannot suppress NSSA type-7 ranges Node rb: NSSA external route that should be summarized is advertised into backbone area Node rb: NSSA external route that should be suppressed is advertised into backbone area Node rb: NSSA type-7 routes are not summarized into type-5 LSA
41-gr	❌				26.09	2026-08-21 16:38:37
42-bfd		✅	✅	✅	26.09	2026-08-21 16:39:59	vrnetlab/cisco_iol:17.18.02

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices