Integration Test Results (Release 1.9.0-post1)

Test	Lab started	Devices configured	Validated
01-network	✅	✅	✅
02-areas	✅	✅	✅
03-cost	✅	✅	✅
04-passive	✅	✅	✅
05-unnumbered	✅	✅	✅
06-lb-prefix	✅	✅	❌ (more)
EOS advertises IPv6 loopback prefixes with /64 prefix length (see RFC 5340, section 4.4.3.9)
10-import	✅	✅	✅
11-import-policy	✅	✅	✅
20-default	✅	✅	✅
21-default-policy	✅	✅	✅
22-default-vrf	✅	✅	✅

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices