Integration Test Results (Release 25.10)

Test	Supported	Lab started	Devices configured	Validated	Netlab version	Test date	Device image
01-ipv4		✅	✅	✅	25.07	2025-07-13 17:12:43	cisco/csr1000v:17.03.04
02-ipv6		✅	✅	✅	25.07	2025-07-13 17:14:54	cisco/csr1000v:17.03.04
10-passive-ipv4		✅	✅	✅	25.07	2025-07-13 17:17:01	cisco/csr1000v:17.03.04
11-passive-ipv6	✔	✅	✅	❌ (more)	25.07	2025-07-13 17:20:04	cisco/csr1000v:17.03.04
Cisco IOS/XE implementation of RIPng does not support passive interfaces csr: Cisco IOS/IOS-XE does not support passive RIPng interfaces - node dut intf GigabitEthernet3(dut -> x2) csr: Cisco IOS/IOS-XE does not support passive RIPng interfaces - node dut intf GigabitEthernet4(dut -> stub)
21-import-ds		✅	✅	✅	25.07	2025-07-13 17:22:30	cisco/csr1000v:17.03.04
31-vrf-ipv4		✅	✅	✅	25.07	2025-07-13 17:24:55	cisco/csr1000v:17.03.04
32-vrf-ipv6		✅	✅	✅	25.07	2025-07-13 17:27:24	cisco/csr1000v:17.03.04

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices