Integration Test Results (Release 26.09)

Device	cat8000v
Provider	libvirt
Test suite	ospf/ospfv3

Test	Supported	Lab started	Devices configured	Validated	Netlab version	Test date	Device image
01-network		✅	✅	✅	26.04	2026-04-10 21:03:25	cisco/cat8000v:17.16.01a
02-areas		✅	✅	✅	26.04	2026-04-10 21:06:04	cisco/cat8000v:17.16.01a
03-cost		✅	✅	✅	26.04	2026-04-10 21:08:36	cisco/cat8000v:17.16.01a
04-passive		✅	✅	✅	26.04	2026-04-10 21:11:27	cisco/cat8000v:17.16.01a
05-unnumbered		✅	✅	✅	26.04	2026-04-10 21:13:54	cisco/cat8000v:17.16.01a
06-lb-prefix		✅	✅	✅	26.04	2026-04-10 21:16:24	cisco/cat8000v:17.16.01a
07-vlan-mtu		✅	✅	✅	26.04	2026-04-10 21:18:50	cisco/cat8000v:17.16.01a
08-dual-stack		✅	✅	✅	26.05	2026-05-07 14:11:32	cisco/cat8000v:17.16.01a
10-import		✅	✅	✅	26.04	2026-04-10 21:21:21	cisco/cat8000v:17.16.01a
11-import-policy		✅	✅	✅	26.04	2026-04-10 21:23:50	cisco/cat8000v:17.16.01a
20-default		✅	✅	✅	26.04	2026-04-10 21:26:38	cisco/cat8000v:17.16.01a
21-default-policy		✅	✅	✅	26.04	2026-04-10 21:29:10	cisco/cat8000v:17.16.01a
22-default-vrf		✅	✅	✅	26.04	2026-04-10 21:31:48	cisco/cat8000v:17.16.01a
30-timers		✅	✅	✅	26.04	2026-04-10 21:34:06	cisco/cat8000v:17.16.01a
31-priority		✅	✅	✅	26.04	2026-04-10 21:37:06	cisco/cat8000v:17.16.01a
40-area-parameters	✔	✅	✅	✔	26.04	2026-04-10 21:40:06	cisco/cat8000v:17.16.01a
ospf: Cisco IOS cannot configure NSSA type-7 ranges ospf: Cisco IOS cannot suppress NSSA type-7 ranges Node rb: NSSA external route that should be summarized is advertised into backbone area Node rb: NSSA external route that should be suppressed is advertised into backbone area Node rb: NSSA type-7 routes are not summarized into type-5 LSA
41-gr	❌				26.07	2026-07-11 14:16:48
42-bfd		✅	✅	✅	26.07	2026-07-11 14:19:45	cisco/cat8000v:17.16.01a

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices