Integration Test Results (Release 2.0.1)

Test	Supported	Lab started	Devices configured	Validated	Netlab version	Test date	Device image
01-network		✅	✅	✅	2.0.0	2025-05-06 17:35:42	aruba/cx:10.15
02-areas		✅	✅	✅	2.0.0	2025-05-06 17:36:48	aruba/cx:10.15
03-cost		✅	✅	✅	2.0.0	2025-05-06 17:37:48	aruba/cx:10.15
04-passive		✅	✅	✅	2.0.0	2025-05-06 17:39:01	aruba/cx:10.15
05-unnumbered		✅	✅	✅	2.0.0	2025-05-06 17:40:03	aruba/cx:10.15
06-lb-prefix		✅	✅	✅	2.0.0	2025-05-06 17:41:03	aruba/cx:10.15
07-vlan-mtu		✅	✅	✅	2.0.0	2025-05-06 17:42:10	aruba/cx:10.15
10-import		✅	✅	✅	2.0.0	2025-05-06 17:43:17	aruba/cx:10.15
11-import-policy		✅	✅	✅	2.0.0	2025-05-06 17:44:27	aruba/cx:10.15
20-default		✅	✅	✔	2.0.0	2025-05-06 17:45:41	aruba/cx:10.15
Aruba CX cannot specify the OSPF external route type on the default route. All default routes are advertised as E2 routes. Node probe: There is no path to ::/0 in the OSPFv3 topology with cost=30
21-default-policy	❌				2.0.0	2025-05-06 17:45:47
22-default-vrf		✅	✅	✅	2.0.0	2025-05-06 17:46:53	aruba/cx:10.15
30-timers		✅	✅	✅	2.0.0	2025-05-06 17:47:48	aruba/cx:10.15
31-priority	❌				2.0.0	2025-05-06 17:47:53

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices