Integration Test Results (Release 25.10)

Device arubacx
Provider libvirt
Test suite ospf/ospfv2
Test Supported Lab
started		 Devices
configured		 Validated Netlab
version		 Test date Device
image
01-network ✅ ✅ ✅ 25.07 2025-07-10 05:59:50 aruba/cx:10.15
02-areas ✅ ✅ ✅ 25.07 2025-07-10 06:00:52 aruba/cx:10.15
03-cost ✅ ✅ ✅ 25.07 2025-07-10 06:01:51 aruba/cx:10.15
04-passive ✅ ✅ ✅ 25.07 2025-07-10 06:03:01 aruba/cx:10.15
05-unnumbered ✅ ✅ ✅ 25.07 2025-07-10 06:03:57 aruba/cx:10.15
06-vlan-mtu ✅ ✅ ✅ 25.07 2025-07-10 06:05:01 aruba/cx:10.15
10-import ✅ ✅ ✅ 25.07 2025-07-10 06:06:06 aruba/cx:10.15
11-import-policy ✅ ✅ ✅ 25.07 2025-07-10 06:07:11 aruba/cx:10.15
20-default ✔ ✅ ✅ ✔ 25.07 2025-07-10 06:08:20 aruba/cx:10.15
  • Aruba CX cannot specify the OSPF external route type on the default route. All default routes are advertised as E2 routes.
  • arubacx: OSPF default-information originate (used in global routing table on node dut_a) does not support metric-type attribute
  • arubacx: OSPF default-information originate (used in global routing table on node dut_c) does not support metric-type attribute
  • Node probe: There is no path to 0.0.0.0/0 in the OSPF topology with cost=30
21-default-policy ❌ 25.07 2025-07-10 06:08:27
22-default-vrf ✅ ✅ ✅ 25.07 2025-07-10 06:09:37 aruba/cx:10.15
30-timers ✅ ✅ ✅ 25.07 2025-07-10 06:10:32 aruba/cx:10.15
31-priority ✅ ✅ ✅ 25.07 2025-07-10 06:11:58 aruba/cx:10.15
32-password ✅ ✅ ✅ 25.07 2025-07-10 06:12:55 aruba/cx:10.15
40-area-parameters ✅ ✅ ✔ 25.07 2025-07-10 06:14:24 aruba/cx:10.15
  • Node r22: The default route inserted in NSSA/stub area has wrong cost
  • Node rb: Inter-area routes do not have the correct cost
  • Node rb: NSSA range is missing or has incorrect cost

Notes: